POWER DATA LOGGING

Adlec offer a full Power Logging service survey and report on all Industrial, Commercial, Agriculturaland Domestic properties or sites.

The use of a Power Logger can be split into four key areas:

  • Load studies – verify electrical system capacity before adding loads
  • Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
  • Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment
  • Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping

Why have a load study carried out? They are invaluable in terms of safety, operational efficiency and finance.

Using our equipment we will be a able to determine if an existing power distribution system can cope with envisioned new loads, verifying cable and system capacity, balancing load distribution over three phases, keeping track of power factor, and to quantify energy consumption before and after improvements to justify energy saving devices.

Contact Adlec today for more information about our power data logging service. A member of our customer’s service team will be able to provide further advice on any specific requirements.

Power data loggers provide information on voltage, power, current, energy, displays, etc. The power data system is designed to graph the results gotten and highlight the periods that had irregularities. The system provides accurate results.

Adlec installs, runs and maintains power data loggers of the best quality. All the power loggers installed are durable and produce accurate results. The readings will provide required information on any equipment or installation. Once detected, the necessary adjustments are made to save energy and money.

Power data logging can be used to measure current and spare capacity at source. Adlec power data logging service is the most affordable for its efficiency and effectiveness. With the power data logger, we can provide adequate information and solution to all electrical installations.

We put in the time and effort to provide the best services to our clients. Our employees are likewise dedicated to performing their job in a professional and timely manner. The readings acquired from the power data loggers are well interpreted and can be passed to clients in multiple formats as required.

ELECTRICAL ENGINEERING

Our electrical engineering services are often requested by customers in a wide range of business sectors. We provide installation, maintenance and repair of electrical systems to many companies and have been a Peel Group approved contractor for many years. We have experience in industries such as; Aerospace, Chemical, Automotive, Defence, Construction, Marine, Financial institutions, Rail, pharmaceutical, Telecoms, Oil and Gas, and many others.

Adlec is the best choice you can make in installing, maintaining and repairing all your electrical systems whenever the need arises. We’ve got the best regarding quality, prices and responsiveness to the demands of our clients. Our workers are experienced and dedicated to their jobs.

High and Low Voltage Cable Installation Services

Adlec install cables in trenches, duct work and all forms of cable containment. Cable installations range from fibre optic through to large CSA power cables. No cable is too large.
We are therefore able to offer the following services, in the knowledge that the works will be completed to the highest standards:

  • Project management
  • Metering & instrumentation
  • LV/HV underground cabling
  • Transformer installation testing and commissioning up to 11kV
  • Earthing system design and installation
  • Protection system design, installation, testing and commissioning
  • High voltage cable fault location and repair work
  • Low voltage switchgear installation and maintenance
  • High voltage switchgear installation and maintenance

All aspects of Cable installations are undertaken, typical projects include:

  • Schools/ universities
  • Distribution Warehouses
  • Large retail & Leisure complexes
  • Industrial Sites

High and Low Voltage Cable Terminations & Jointing

Adlec have certified Cable Jointers available to complete projects on all types of Cables ranging up to 11KV and private networks. We also have an experienced team of approved electricians who can take care of all your control and instrument needs.
Our jointers are trained to work on the following types of cables:

  • PILC
  • XLPE
  • EARTH
  • HV

We are able to joint any combination of the above.
All aspects of Cable installations are undertaken, typical projects include:

  • Docks and marine environments
  • Schools/ universities
  • Distribution Warehouses
  • Large retail & Leisure complexes
  • Industrial Sites

Turn Key Electrical Installations

Adlec using its proven track record can offer Turn Key Electrical Installations, from the initial enquiry through to practical completion. At the enquiry stage we would send out a technical engineer to discuss requirements. Following on from the initial consultation we will produce a solution to all your electrical requirements.

Features:

  • Project Design
  • Commercial proposal of the engineered solution
  • Client Approval of the project design and drawings
  • The project would be undertaken in accordance with the proposal
  • Upon project completion, full testing and commissioning would be carried out
  • The project is then signed off as to customer’s satisfaction.

Recommended suppliers
We are equally happy to carry out ‘The Electrical Installation’ as this is what we have specialised in as a company, we can also recommend suppliers with whom the customers can deal directly with.
Please talk to us if your electrical requirement is part of a larger multi-product project. 
Also as the lead contractor we would bring together all the provisions for onsite work.
This Includes:

  • Civil Works
  • Building and Construction Work
  • Jointing
  • Onsite Temporary Generators
  • Transport
  • Specialist Lifting and Cranes
  • Access Equipment
electrical

CAD Drawing Services

Adlec offers a wide range of CAD electrical drawings dedicated to electric systems. Electrical drawings are more complex and difficult to read because of their complex circuitry but we at Adlec make it easy to understand with our expertise.

You get perfect, professional looking electrical CAD drawings every time. The advantages of using our electrical drawing services are:

  • The final output is editable and will be in a DWG format because we create the drawing as a new file.
  • We can create as many layers as you require. We generate separate layers for dimensions, text, body, hidden lines, and centrelines, etc.
  • We use blocks for different entities.